The perfect quality daily driver pad option for all modern cars, petrol, diesel, hybrid or electric.
These premium quality British made pads are designed to meet or exceed the performance of any OEM pad and are fully R90 approved. The EBC Brakes Ultimax range are long lasting, high friction pads designed for normal urban driving at all speeds on prestige cars, 4x4 and light trucks.
- Copper free for ECO compliance
BF004LV is a premium spec. brake and clutch fluid for use in the hydraulic brake systems of all cars with ASR/ESP systems.
Typical Dry Boiling Point - 268℃ (514°F).
Min. Wet Boiling Point - 165℃(329℉).
BF005.1 is a premium spec. brake and clutch fluid for use in the hydraulic brake and clutch systems of all motorcycles, cars and commercial vehicles for which non-petroleum based fluid is specified.
Typical Dry Boiling Point - 268℃ (514°F).
Min. Wet Boiling Point - 180°C (358℉).
- Excellent type approved upgrade pad for prestige imports and European/Asian cars
- Featuring Brake-In surface coating for instant bed-in after installation
- Low dust pad which gives a brake improvement of 20-25% on OE
- Minimal rotor damage characteristics
- These pads contain NO steel fibers
EBC Racings' RP‑X compound is an ultra‑high performance track and race pad designed for performance vehicles driven hard on track and for dedicated race cars. RP‑X has a very stable friction coefficient of 0.55μ up to and beyond 850℃, making it an excellent performer for even the most demanding vehicle applications.
RP‑X also has a high friction level from cold, requiring no warmup to achieve maximum braking effect which makes this material well suited for sprint race and hill climb events. Although RP‑X is not R90 homologated for use on the public roads in EU member states, the fact this material possesses excellent cold performance means RP‑X can be safely used for driving to/from motorsport events (where local laws permit).
Yellowstuff ⁃ A first in a new range of 'Hybrid' materials that can be safely and legally used on worlds roads being R90 approved UK are a high friction upgrade pad for all fast street use
and can also be used on the track with proper bedding (see bed in procedures)
Yellowstuff has been the flagship pad by EBC for over a decade and gives instant brake response, great feel and modulations with silk-smooth noise free braking and was also improved in 2021 to be copper free and conform to all new legislations for the environment and our pads are fully shimmed chamfered and slotted .
Yellow arrives with pad surface Brake-in coating to accelerate pad bedding after install.
- 0.48 stable friction once bedded
- Strong initial bite ,work from cold
- Zero rotor damage
- Short to medium race lifetime
- Copper free for ECO compliance
- Fast street use is OK but please read our notes on Yellow Pad Bedding-In here
In tests, Greenstuff has been proven to stop a vehicle 20 feet shorter than using stock pads. Greenstuff pads are fully shimmed, chamfered and slotted for silent braking and also feature the EBC Brake‐In surface coating to accelerate pad bed‐in after installation.
THESE PADS ARE NOT FOR TRACK USE. For heavier and faster cars in street or motorway driving, the best choice is EBC Brakes Redstuff or for fastest street use or track driving of any kind, try EBC Brakes Yellowstuff ,Bluestuff or the new range of RP‑1 and RP‑X pads which are designed for this purpose.
Surely the best aftermarket discs on sale anywhere, EBC Brakes offer OEM quality R90 approved replacement discs made to the exact same specification as the original parts using G3000 grey iron coated to prevent corrosion. EBC will be switching from Gen 1 and 2 to the new silver grey Gen 3 image during 2023
A great all round sport and race pad used by many for fastest street and also trackday events
Bluestuff material exhibits a 0.52μ stable friction once bedded stable up to a slightly higher 550℃/1000℉ than its sister compound yellow but with the benefit of 30% longer life than yellow.
Blue has been a trackday favourite for years and is the spec pad for the BMW 318i Cup series throughout Europe.New formula is copper free to conform to upcoming environmental legislations
- 0.52μ stable friction once bedded
- Strong initial bite ,work from cold
- Zero rotor damage
- Copper free for ECO compliance
- Excellent upgrade pad for SUV and armored vehicles in street use
Super quiet sport slotted brake discs featuring the new EBC Brakes narrow profile slot pattern which helps cool and de-gas brakes under load and speed but eliminates air noise common with some slotted discs. All EBC USR sport discs are now made using R90 approved rotor blanks and are corrosion coated with either Gen 1/2/3 finish. For 2023 all EBC discs will feature the Gen 3 silver Geomet finish to match OE hubs
EBC Racing's RP‑1 compound is an ultra‑high performance track and race pad designed for high performance vehicles driven hard on track. RP‑1 has a very stable friction coefficient of 0.45μ up to and beyond 750℃, making it an excellent performer for even the most demanding vehicle applications.
Due to its relatively high friction coefficient, RP‑1 is not Reg 90 homologated for road use within Europe and is therefore illegal for use on the public road. Unlike some other race pads on the market, RP‑1 offers a usable cold friction of 0.35μ below 100℃ meaning it can be safely used as a road pad for non‑European markets where Reg 90 homologation is not mandatory. At 100℃ the friction gently climbs to 0.45μ and stays there up to and beyond the designed upper working temperature range of 750℃.
BF307 EBC racing brake fluid for use in race conditions where brake systems operate at very high temperatures.
For best results bleed system with fresh fluid before each race.
Do not mix with other brake fluids. Performance may be compromised.
DOT 4. Typical Dry Boiling Point:310℃ (590℉).
Min. Wet Boiling Point:195℃ (383℉).
Not suitable for vehicles with mineral oil systems. If in doubt consult vehicle handbook. Not for use with components made from magnesium or alloys with high magnesium content.
BF004 is a premium spec. brake and clutch fluid for use in the hydraulic brake and clutch systems of all motorcycles, cars and commercial vehicles for which non-petroleum based fluid is specified.
Typical Dry Boiling Point - 268°C (514°F).
Min. Wet Boiling Point - 165℃ (329℉).
Super quiet sport slotted brake discs featuring the new EBC Brakes narrow profile slot pattern which helps cool and de-gas brakes under load and speed but eliminates air noise common with some slotted discs. All EBC USR sport discs are now made using R90 approved rotor blanks and are corrosion coated with either Gen 1/2/3 finish. For 2023 all EBC discs will feature the Gen 3 silver Geomet finish to match OE hubs
Surely the best aftermarket discs on sale anywhere, EBC Brakes offer OEM quality R90 approved replacement discs made to the exact same specification as the original parts using G3000 grey iron coated to prevent corrosion. EBC will be switching from Gen 1 and 2 to the new silver grey Gen 3 image during 2023
- Excellent type approved upgrade pad for prestige imports and European/Asian cars
- Featuring Brake-In surface coating for instant bed-in after installation
- Low dust pad which gives a brake improvement of 20-25% on OE
- Minimal rotor damage characteristics
- These pads contain NO steel fibers
Yellowstuff ⁃ A first in a new range of 'Hybrid' materials that can be safely and legally used on worlds roads being R90 approved UK are a high friction upgrade pad for all fast street use
and can also be used on the track with proper bedding (see bed in procedures)
Yellowstuff has been the flagship pad by EBC for over a decade and gives instant brake response, great feel and modulations with silk-smooth noise free braking and was also improved in 2021 to be copper free and conform to all new legislations for the environment and our pads are fully shimmed chamfered and slotted .
Yellow arrives with pad surface Brake-in coating to accelerate pad bedding after install.
- 0.48 stable friction once bedded
- Strong initial bite ,work from cold
- Zero rotor damage
- Short to medium race lifetime
- Copper free for ECO compliance
- Fast street use is OK but please read our notes on Yellow Pad Bedding-In here
A great all round sport and race pad used by many for fastest street and also trackday events
Bluestuff material exhibits a 0.52μ stable friction once bedded stable up to a slightly higher 550℃/1000℉ than its sister compound yellow but with the benefit of 30% longer life than yellow.
Blue has been a trackday favourite for years and is the spec pad for the BMW 318i Cup series throughout Europe.New formula is copper free to conform to upcoming environmental legislations
- 0.52μ stable friction once bedded
- Strong initial bite ,work from cold
- Zero rotor damage
- Copper free for ECO compliance
- Excellent upgrade pad for SUV and armored vehicles in street use
In tests, Greenstuff has been proven to stop a vehicle 20 feet shorter than using stock pads. Greenstuff pads are fully shimmed, chamfered and slotted for silent braking and also feature the EBC Brake‐In surface coating to accelerate pad bed‐in after installation.
THESE PADS ARE NOT FOR TRACK USE. For heavier and faster cars in street or motorway driving, the best choice is EBC Brakes Redstuff or for fastest street use or track driving of any kind, try EBC Brakes Yellowstuff ,Bluestuff or the new range of RP‑1 and RP‑X pads which are designed for this purpose.
EBC Racing's RP‑1 compound is an ultra‑high performance track and race pad designed for high performance vehicles driven hard on track. RP‑1 has a very stable friction coefficient of 0.45μ up to and beyond 750℃, making it an excellent performer for even the most demanding vehicle applications.
Due to its relatively high friction coefficient, RP‑1 is not Reg 90 homologated for road use within Europe and is therefore illegal for use on the public road. Unlike some other race pads on the market, RP‑1 offers a usable cold friction of 0.35μ below 100℃ meaning it can be safely used as a road pad for non‑European markets where Reg 90 homologation is not mandatory. At 100℃ the friction gently climbs to 0.45μ and stays there up to and beyond the designed upper working temperature range of 750℃.
EBC Racings' RP‑X compound is an ultra‑high performance track and race pad designed for performance vehicles driven hard on track and for dedicated race cars. RP‑X has a very stable friction coefficient of 0.55μ up to and beyond 850℃, making it an excellent performer for even the most demanding vehicle applications.
RP‑X also has a high friction level from cold, requiring no warmup to achieve maximum braking effect which makes this material well suited for sprint race and hill climb events. Although RP‑X is not R90 homologated for use on the public roads in EU member states, the fact this material possesses excellent cold performance means RP‑X can be safely used for driving to/from motorsport events (where local laws permit).
The perfect quality daily driver pad option for all modern cars, petrol, diesel, hybrid or electric.
These premium quality British made pads are designed to meet or exceed the performance of any OEM pad and are fully R90 approved. The EBC Brakes Ultimax range are long lasting, high friction pads designed for normal urban driving at all speeds on prestige cars, 4x4 and light trucks.
- Copper free for ECO compliance
