FERRARI 360 3.6Petrol 405BHP 1999

A great all round sport and race pad used by many for fastest street and also trackday events

Bluestuff material exhibits a 0.52μ stable friction once bedded stable up to a slightly higher 550℃/1000℉ than its sister compound yellow but with the benefit of 30% longer life than yellow.

Blue has been a trackday favourite for years and is the spec pad for the BMW 318i Cup series throughout Europe.New formula is copper free to conform to upcoming environmental legislations

• 0.52μ stable friction once bedded
• Strong initial bite ,work from cold
• Zero rotor damage
• Copper free for ECO compliance
• Excellent upgrade pad for SUV and armored vehicles in street use

EBC make two sintered pad blends, SR11 lower friction and SR21 high friction.

Both are fully sintered pad blends for fastest asphalt race and endurance applications and have been independently dyno tested to LMGTE/GTLM race parameters. The new EBC SR range is a low-noise, fast bedding, long-life sintered pad blend that is designed to offer the LOWEST pad-wear-cost-per-lap in race driving. The pads work on a deposit film basis which reduces disc/rotor wear to almost zero. Bed-in is almost instant with one lap normally sufficient on decent rotor surfaces.

Just add the appropriate suffix to select higher or lower friction after the part number and thickness dimension.

• Excellent type approved upgrade pad for prestige imports and European/Asian cars
• Featuring Brake-In surface coating for instant bed-in after installation
• Low dust pad which gives a brake improvement of 20-25% on OE
• Minimal rotor damage characteristics
• These pads contain NO steel fibers

EBC Racings' RP‑X compound is an ultra‑high performance track and race pad designed for performance vehicles driven hard on track and for dedicated race cars. RP‑X has a very stable friction coefficient of 0.55μ up to and beyond 850℃, making it an excellent performer for even the most demanding vehicle applications.

RP‑X also has a high friction level from cold, requiring no warmup to achieve maximum braking effect which makes this material well suited for sprint race and hill climb events. Although RP‑X is not R90 homologated for use on the public roads in EU member states, the fact this material possesses excellent cold performance means RP‑X can be safely used for driving to/from motorsport events (where local laws permit).

Developed as a full race pad with a high friction level that increases with temperature.

EBC Racing's RP‑1 compound is an ultra‑high performance track and race pad designed for high performance vehicles driven hard on track. RP‑1 has a very stable friction coefficient of 0.45μ up to and beyond 750℃, making it an excellent performer for even the most demanding vehicle applications.

Due to its relatively high friction coefficient, RP‑1 is not Reg 90 homologated for road use within Europe and is therefore illegal for use on the public road. Unlike some other race pads on the market, RP‑1 offers a usable cold friction of 0.35μ below 100℃ meaning it can be safely used as a road pad for non‑European markets where Reg 90 homologation is not mandatory. At 100℃ the friction gently climbs to 0.45μ and stays there up to and beyond the designed upper working temperature range of 750℃.

EBC make two sintered pad blends, SR11 lower friction and SR21 high friction.

Both are fully sintered pad blends for fastest asphalt race and endurance applications and have been independently dyno tested to LMGTE/GTLM race parameters. The new EBC SR range is a low-noise, fast bedding, long-life sintered pad blend that is designed to offer the LOWEST pad-wear-cost-per-lap in race driving. The pads work on a deposit film basis which reduces disc/rotor wear to almost zero. Bed-in is almost instant with one lap normally sufficient on decent rotor surfaces.

Just add the appropriate suffix to select higher or lower friction after the part number and thickness dimension.

Yellowstuff ⁃ A first in a new range of 'Hybrid' materials that can be safely and legally used on worlds roads being R90 approved UK are a high friction upgrade pad for all fast street use

and can also be used on the track with proper bedding (see bed in procedures)

Yellowstuff has been the flagship pad by EBC for over a decade and gives instant brake response, great feel and modulations with silk-smooth noise free braking and was also improved in 2021 to be copper free and conform to all new legislations for the environment and our pads are fully shimmed chamfered and slotted .

Yellow arrives with pad surface Brake-in coating to accelerate pad bedding after install.

• 0.48 stable friction once bedded
• Strong initial bite ,work from cold
• Zero rotor damage
• Short to medium race lifetime
• Copper free for ECO compliance
• Fast street use is OK but please read our notes on Yellow Pad Bedding-In here