BF004LV is a premium spec. brake and clutch fluid for use in the hydraulic brake systems of all cars with ASR/ESP systems.
Typical Dry Boiling Point - 268℃ (514°F).
Min. Wet Boiling Point - 165℃(329℉).
BF005.1 is a premium spec. brake and clutch fluid for use in the hydraulic brake and clutch systems of all motorcycles, cars and commercial vehicles for which non-petroleum based fluid is specified.
Typical Dry Boiling Point - 268℃ (514°F).
Min. Wet Boiling Point - 180°C (358℉).
Super quiet sport slotted brake discs featuring the new EBC Brakes narrow profile slot pattern which helps cool and de-gas brakes under load and speed but eliminates air noise common with some slotted discs. All EBC USR sport discs are now made using R90 approved rotor blanks and are corrosion coated with either Gen 1/2/3 finish. For 2023 all EBC discs will feature the Gen 3 silver Geomet finish to match OE hubs
Surely the best aftermarket discs on sale anywhere, EBC Brakes offer OEM quality R90 approved replacement discs made to the exact same specification as the original parts using G3000 grey iron coated to prevent corrosion. EBC will be switching from Gen 1 and 2 to the new silver grey Gen 3 image during 2023
Surely the best aftermarket discs on sale anywhere, EBC Brakes offer OEM quality R90 approved replacement discs made to the exact same specification as the original parts using G3000 grey iron coated to prevent corrosion. EBC will be switching from Gen 1 and 2 to the new silver grey Gen 3 image during 2023
BF307 EBC racing brake fluid for use in race conditions where brake systems operate at very high temperatures.
For best results bleed system with fresh fluid before each race.
Do not mix with other brake fluids. Performance may be compromised.
DOT 4. Typical Dry Boiling Point:310℃ (590℉).
Min. Wet Boiling Point:195℃ (383℉).
Not suitable for vehicles with mineral oil systems. If in doubt consult vehicle handbook. Not for use with components made from magnesium or alloys with high magnesium content.
BF004 is a premium spec. brake and clutch fluid for use in the hydraulic brake and clutch systems of all motorcycles, cars and commercial vehicles for which non-petroleum based fluid is specified.
Typical Dry Boiling Point - 268°C (514°F).
Min. Wet Boiling Point - 165℃ (329℉).
All GD discs are now made totally using R90 approved rotor blanks.
Fast street GD sport discs feature wide aperture slots that draw cool air into the braking contact area and reduce temperatures preventing brake fade. Dimple drilling avoids stress cracks and Gen 1/2/3 coating provides great looks whilst preventing corrosion. For 2023 all new production is in the GEN 3 silver Geomet to match OE rotor hubs.
Yellowstuff ⁃ A first in a new range of 'Hybrid' materials that can be safely and legally used on worlds roads being R90 approved UK are a high friction upgrade pad for all fast street use
and can also be used on the track with proper bedding (see bed in procedures)
Yellowstuff has been the flagship pad by EBC for over a decade and gives instant brake response, great feel and modulations with silk-smooth noise free braking and was also improved in 2021 to be copper free and conform to all new legislations for the environment and our pads are fully shimmed chamfered and slotted .
Yellow arrives with pad surface Brake-in coating to accelerate pad bedding after install.
- 0.48 stable friction once bedded
- Strong initial bite ,work from cold
- Zero rotor damage
- Short to medium race lifetime
- Copper free for ECO compliance
- Fast street use is OK but please read our notes on Yellow Pad Bedding-In here
The perfect quality daily driver pad option for all modern cars, petrol, diesel, hybrid or electric.
These premium quality British made pads are designed to meet or exceed the performance of any OEM pad and are fully R90 approved. The EBC Brakes Ultimax range are long lasting, high friction pads designed for normal urban driving at all speeds on prestige cars, 4x4 and light trucks.
- Copper free for ECO compliance
Yellowstuff ⁃ A first in a new range of 'Hybrid' materials that can be safely and legally used on worlds roads being R90 approved UK are a high friction upgrade pad for all fast street use
and can also be used on the track with proper bedding (see bed in procedures)
Yellowstuff has been the flagship pad by EBC for over a decade and gives instant brake response, great feel and modulations with silk-smooth noise free braking and was also improved in 2021 to be copper free and conform to all new legislations for the environment and our pads are fully shimmed chamfered and slotted .
Yellow arrives with pad surface Brake-in coating to accelerate pad bedding after install.
- 0.48 stable friction once bedded
- Strong initial bite ,work from cold
- Zero rotor damage
- Short to medium race lifetime
- Copper free for ECO compliance
- Fast street use is OK but please read our notes on Yellow Pad Bedding-In here
The perfect quality daily driver pad option for all modern cars, petrol, diesel, hybrid or electric.
These premium quality British made pads are designed to meet or exceed the performance of any OEM pad and are fully R90 approved. The EBC Brakes Ultimax range are long lasting, high friction pads designed for normal urban driving at all speeds on prestige cars, 4x4 and light trucks.
- Copper free for ECO compliance
