EBC Racings' RP‑X compound is an ultra‑high performance track and race pad designed for performance vehicles driven hard on track and for dedicated race cars. RP‑X has a very stable friction coefficient of 0.55μ up to and beyond 850℃, making it an excellent performer for even the most demanding vehicle applications.
RP‑X also has a high friction level from cold, requiring no warmup to achieve maximum braking effect which makes this material well suited for sprint race and hill climb events. Although RP‑X is not R90 homologated for use on the public roads in EU member states, the fact this material possesses excellent cold performance means RP‑X can be safely used for driving to/from motorsport events (where local laws permit).
EBC make two sintered pad blends, SR11 lower friction and SR21 high friction.
Both are fully sintered pad blends for fastest asphalt race and endurance applications and have been independently dyno tested to LMGTE/GTLM race parameters. The new EBC SR range is a low-noise, fast bedding, long-life sintered pad blend that is designed to offer the LOWEST pad-wear-cost-per-lap in race driving. The pads work on a deposit film basis which reduces disc/rotor wear to almost zero. Bed-in is almost instant with one lap normally sufficient on decent rotor surfaces.
Just add the appropriate suffix to select higher or lower friction after the part number and thickness dimension.
EBC Racing's RP‑1 compound is an ultra‑high performance track and race pad designed for high performance vehicles driven hard on track. RP‑1 has a very stable friction coefficient of 0.45μ up to and beyond 750℃, making it an excellent performer for even the most demanding vehicle applications.
Due to its relatively high friction coefficient, RP‑1 is not Reg 90 homologated for road use within Europe and is therefore illegal for use on the public road. Unlike some other race pads on the market, RP‑1 offers a usable cold friction of 0.35μ below 100℃ meaning it can be safely used as a road pad for non‑European markets where Reg 90 homologation is not mandatory. At 100℃ the friction gently climbs to 0.45μ and stays there up to and beyond the designed upper working temperature range of 750℃.
BF004LV is a premium spec. brake and clutch fluid for use in the hydraulic brake systems of all cars with ASR/ESP systems.
Typical Dry Boiling Point - 268℃ (514°F).
Min. Wet Boiling Point - 165℃(329℉).
BF005.1 is a premium spec. brake and clutch fluid for use in the hydraulic brake and clutch systems of all motorcycles, cars and commercial vehicles for which non-petroleum based fluid is specified.
Typical Dry Boiling Point - 268℃ (514°F).
Min. Wet Boiling Point - 180°C (358℉).
SAVE 50% off the price of the pads when buying an EBC pad & 2pc disc kit.
Kit contains a pair of fully-floating 2-piece brake discs and one set of high performance Yellowstuff brake pads.
EBC Racing's fully-floating 2-piece brake discs combined with our high performance Yellowstuff pads represent the ultimate braking upgrade for high powered vehicles driven fast on road or participating in the occasional trackday.
EBC's famous Yellowstuff material has a high cold friction level, boasts excellent pedal 'feel' and exhibits superior fade resistance compared to OEM parts.
Yellowstuff pads offer a depth of precision and control most other brake pads could only dream of, yet they achieve this high level of performance without sacrifices in noise levels or wheel dusting. No wonder Yellowstuff is one of the most popular performance road pad choices among driving enthusiasts the world over.
Yellowstuff ⁃ A first in a new range of 'Hybrid' materials that can be safely and legally used on worlds roads being R90 approved UK are a high friction upgrade pad for all fast street use
and can also be used on the track with proper bedding (see bed in procedures)
Yellowstuff has been the flagship pad by EBC for over a decade and gives instant brake response, great feel and modulations with silk-smooth noise free braking and was also improved in 2021 to be copper free and conform to all new legislations for the environment and our pads are fully shimmed chamfered and slotted .
Yellow arrives with pad surface Brake-in coating to accelerate pad bedding after install.
- 0.48 stable friction once bedded
- Strong initial bite ,work from cold
- Zero rotor damage
- Short to medium race lifetime
- Copper free for ECO compliance
- Fast street use is OK but please read our notes on Yellow Pad Bedding-In here
Developed as a full race pad with a high friction level that increases with temperature.
Our Fully-Floating 2-Piece Brake Discs will be supplied with either a thermic black or standard metallic silver disc ring
- PRICE PER AXLE SET (incl. LH and RH disc)
- Designed, manufactured and run-out tested inthe UK
- Sold either as a direct replacement for performance vehicles where 2-piece brake discs are fitted as standard
- OR as a simple bolt-on 2-piece floating upgrade for vehicles with 1-piece cast iron discs fitted as standard. Where the vehicle has a 2-piece pin-drive brake disc as original equipment, EBC’s SG2F 2-piece disc upgrade seamlessly replaces the pin-drive disc with a true fully-floating 2-piece disc, whilst requiring no vehicle modifications
- No vehicle modifications are required for 2-piece disc conversions
- 48 directionally handed curved vanes for effective heat dissipation
- Lower operating temperatures help delay the onset of brake fade
- Lighter weight than OE discs
SAVE 50% off the price of the pads when buying an EBC pad & 2pc disc kit.
Kit contains a pair of fully-floating 2-piece brake discs and one set of full-race RP-1 brake pads.
EBC Racing's fully-floating 2-piece brake discs combined with our full race RP-1 pads represents the ultimate braking upgrade for dedicated track & race cars seeking peak levels of on-track performance.
RP-1 has a very stable friction coefficient of 0.45 mu up to and beyond 750℃, making it an excellent performer for even the most demanding vehicle applications.
Due to its relatively high friction coefficient, RP-1 is not Reg 90 homologated for road use within Europe and is therefore illegal for use on the public road. Unlike some other race pads on the market, RP-1 offers a usable cold friction of 0.35 mu below 100℃ meaning it can be safely used as a road pad for non-European markets where Reg 90 homologation is not mandatory.
These new perforated titanium heat insulation shims have been shown in laboratory tests to reduce heat transfer through the pads to the caliper by around 90℉.
A great all round sport and race pad used by many for fastest street and also trackday events
Bluestuff material exhibits a 0.52μ stable friction once bedded stable up to a slightly higher 550℃/1000℉ than its sister compound yellow but with the benefit of 30% longer life than yellow.
Blue has been a trackday favourite for years and is the spec pad for the BMW 318i Cup series throughout Europe.New formula is copper free to conform to upcoming environmental legislations
- 0.52μ stable friction once bedded
- Strong initial bite ,work from cold
- Zero rotor damage
- Copper free for ECO compliance
- Excellent upgrade pad for SUV and armored vehicles in street use
Our Fully-Floating 2-Piece Brake Discs will be supplied with either a thermic black or standard metallic silver disc ring
- PRICE PER AXLE SET (incl. LH and RH disc)
- Designed, manufactured and run-out tested inthe UK
- Sold either as a direct replacement for performance vehicles where 2-piece brake discs are fitted as standard
- OR as a simple bolt-on 2-piece floating upgrade for vehicles with 1-piece cast iron discs fitted as standard. Where the vehicle has a 2-piece pin-drive brake disc as original equipment, EBC’s SG2F 2-piece disc upgrade seamlessly replaces the pin-drive disc with a true fully-floating 2-piece disc, whilst requiring no vehicle modifications
- No vehicle modifications are required for 2-piece disc conversions
- 48 directionally handed curved vanes for effective heat dissipation
- Lower operating temperatures help delay the onset of brake fade
- Lighter weight than OE discs
SAVE 50% off the price of the pads when buying an EBC pad & 2pc disc kit.
Kit contains a pair of fully-floating 2-piece brake discs and one set of track-focused Bluestuff brake pads.
EBC Racing's fully-floating 2-piece brake discs combined with our track-focused Bluestuff pads represent the ultimate braking upgrade for high powered vehicles driven fast on road or frequently driven on track.
EBC's Bluestuff material is R90 approved and thus totally road legal, yet has a higher emphasis placed on on-track performance, making it the perfect choice for customers who want to keep their car road-legal but demand excellent performance when they get to the racetrack.
Bluestuff has a high cold friction level, excellent pedal 'feel' and boasts a higher fade resistance over EBC's popular Yellowstuff compound.
A great all round sport and race pad used by many for fastest street and also trackday events
Bluestuff material exhibits a 0.52μ stable friction once bedded stable up to a slightly higher 550℃/1000℉ than its sister compound yellow but with the benefit of 30% longer life than yellow.
Blue has been a trackday favourite for years and is the spec pad for the BMW 318i Cup series throughout Europe.New formula is copper free to conform to upcoming environmental legislations
- 0.52μ stable friction once bedded
- Strong initial bite ,work from cold
- Zero rotor damage
- Copper free for ECO compliance
- Excellent upgrade pad for SUV and armored vehicles in street use
EBC make two sintered pad blends, SR11 lower friction and SR21 high friction.
Both are fully sintered pad blends for fastest asphalt race and endurance applications and have been independently dyno tested to LMGTE/GTLM race parameters. The new EBC SR range is a low-noise, fast bedding, long-life sintered pad blend that is designed to offer the LOWEST pad-wear-cost-per-lap in race driving. The pads work on a deposit film basis which reduces disc/rotor wear to almost zero. Bed-in is almost instant with one lap normally sufficient on decent rotor surfaces.
Just add the appropriate suffix to select higher or lower friction after the part number and thickness dimension.
Developed as a full race pad with a high friction level that increases with temperature.
These new perforated titanium heat insulation shims have been shown in laboratory tests to reduce heat transfer through the pads to the caliper by around 90℉.
EBC make two sintered pad blends, SR11 lower friction and SR21 high friction.
Both are fully sintered pad blends for fastest asphalt race and endurance applications and have been independently dyno tested to LMGTE/GTLM race parameters. The new EBC SR range is a low-noise, fast bedding, long-life sintered pad blend that is designed to offer the LOWEST pad-wear-cost-per-lap in race driving. The pads work on a deposit film basis which reduces disc/rotor wear to almost zero. Bed-in is almost instant with one lap normally sufficient on decent rotor surfaces.
Just add the appropriate suffix to select higher or lower friction after the part number and thickness dimension.
EBC make two sintered pad blends, SR11 lower friction and SR21 high friction.
Both are fully sintered pad blends for fastest asphalt race and endurance applications and have been independently dyno tested to LMGTE/GTLM race parameters. The new EBC SR range is a low-noise, fast bedding, long-life sintered pad blend that is designed to offer the LOWEST pad-wear-cost-per-lap in race driving. The pads work on a deposit film basis which reduces disc/rotor wear to almost zero. Bed-in is almost instant with one lap normally sufficient on decent rotor surfaces.
Just add the appropriate suffix to select higher or lower friction after the part number and thickness dimension.
BF307 EBC racing brake fluid for use in race conditions where brake systems operate at very high temperatures.
For best results bleed system with fresh fluid before each race.
Do not mix with other brake fluids. Performance may be compromised.
DOT 4. Typical Dry Boiling Point:310℃ (590℉).
Min. Wet Boiling Point:195℃ (383℉).
Not suitable for vehicles with mineral oil systems. If in doubt consult vehicle handbook. Not for use with components made from magnesium or alloys with high magnesium content.
BF004 is a premium spec. brake and clutch fluid for use in the hydraulic brake and clutch systems of all motorcycles, cars and commercial vehicles for which non-petroleum based fluid is specified.
Typical Dry Boiling Point - 268°C (514°F).
Min. Wet Boiling Point - 165℃ (329℉).
Kit contains a pair of fully-floating 2-piece brake discs and one set of full-race RP-X brake pads.
EBC Racing's fully-floating 2-piece brake discs combined with our full race RP-X pads represents the ultimate braking upgrade for performance vehicles driven hard on track or for dedicated race cars.
RP-X has a very stable friction coefficient of 0.55 mu up to and beyond 850℃C, making it an excellent performer for even the most demanding vehicle applications.
RP-X also has a high friction level from cold, requiring no warmup to achieve maximum braking effect which makes this material well suited for sprint race and hill climb events.
EBC Racing's RP‑1 compound is an ultra‑high performance track and race pad designed for high performance vehicles driven hard on track. RP‑1 has a very stable friction coefficient of 0.45μ up to and beyond 750℃, making it an excellent performer for even the most demanding vehicle applications.
Due to its relatively high friction coefficient, RP‑1 is not Reg 90 homologated for road use within Europe and is therefore illegal for use on the public road. Unlike some other race pads on the market, RP‑1 offers a usable cold friction of 0.35μ below 100℃ meaning it can be safely used as a road pad for non‑European markets where Reg 90 homologation is not mandatory. At 100℃ the friction gently climbs to 0.45μ and stays there up to and beyond the designed upper working temperature range of 750℃.
EBC Racings' RP‑X compound is an ultra‑high performance track and race pad designed for performance vehicles driven hard on track and for dedicated race cars. RP‑X has a very stable friction coefficient of 0.55μ up to and beyond 850℃, making it an excellent performer for even the most demanding vehicle applications.
RP‑X also has a high friction level from cold, requiring no warmup to achieve maximum braking effect which makes this material well suited for sprint race and hill climb events. Although RP‑X is not R90 homologated for use on the public roads in EU member states, the fact this material possesses excellent cold performance means RP‑X can be safely used for driving to/from motorsport events (where local laws permit).
Yellowstuff ⁃ A first in a new range of 'Hybrid' materials that can be safely and legally used on worlds roads being R90 approved UK are a high friction upgrade pad for all fast street use
and can also be used on the track with proper bedding (see bed in procedures)
Yellowstuff has been the flagship pad by EBC for over a decade and gives instant brake response, great feel and modulations with silk-smooth noise free braking and was also improved in 2021 to be copper free and conform to all new legislations for the environment and our pads are fully shimmed chamfered and slotted .
Yellow arrives with pad surface Brake-in coating to accelerate pad bedding after install.
- 0.48 stable friction once bedded
- Strong initial bite ,work from cold
- Zero rotor damage
- Short to medium race lifetime
- Copper free for ECO compliance
- Fast street use is OK but please read our notes on Yellow Pad Bedding-In here
