BF004LV is a premium spec. brake and clutch fluid for use in the hydraulic brake systems of all cars with ASR/ESP systems.
Typical Dry Boiling Point - 268℃ (514°F).
Min. Wet Boiling Point - 165℃(329℉).
BF005.1 is a premium spec. brake and clutch fluid for use in the hydraulic brake and clutch systems of all motorcycles, cars and commercial vehicles for which non-petroleum based fluid is specified.
Typical Dry Boiling Point - 268℃ (514°F).
Min. Wet Boiling Point - 180°C (358℉).
A great all round sport and race pad used by many for fastest street and also trackday events
Bluestuff material exhibits a 0.52μ stable friction once bedded stable up to a slightly higher 550℃/1000℉ than its sister compound yellow but with the benefit of 30% longer life than yellow.
Blue has been a trackday favourite for years and is the spec pad for the BMW 318i Cup series throughout Europe.New formula is copper free to conform to upcoming environmental legislations
- 0.52μ stable friction once bedded
- Strong initial bite ,work from cold
- Zero rotor damage
- Copper free for ECO compliance
- Excellent upgrade pad for SUV and armored vehicles in street use
Yellowstuff ⁃ A first in a new range of 'Hybrid' materials that can be safely and legally used on worlds roads being R90 approved UK are a high friction upgrade pad for all fast street use
and can also be used on the track with proper bedding (see bed in procedures)
Yellowstuff has been the flagship pad by EBC for over a decade and gives instant brake response, great feel and modulations with silk-smooth noise free braking and was also improved in 2021 to be copper free and conform to all new legislations for the environment and our pads are fully shimmed chamfered and slotted .
Yellow arrives with pad surface Brake-in coating to accelerate pad bedding after install.
- 0.48 stable friction once bedded
- Strong initial bite ,work from cold
- Zero rotor damage
- Short to medium race lifetime
- Copper free for ECO compliance
- Fast street use is OK but please read our notes on Yellow Pad Bedding-In here
BF307 EBC racing brake fluid for use in race conditions where brake systems operate at very high temperatures.
For best results bleed system with fresh fluid before each race.
Do not mix with other brake fluids. Performance may be compromised.
DOT 4. Typical Dry Boiling Point:310℃ (590℉).
Min. Wet Boiling Point:195℃ (383℉).
Not suitable for vehicles with mineral oil systems. If in doubt consult vehicle handbook. Not for use with components made from magnesium or alloys with high magnesium content.
BF004 is a premium spec. brake and clutch fluid for use in the hydraulic brake and clutch systems of all motorcycles, cars and commercial vehicles for which non-petroleum based fluid is specified.
Typical Dry Boiling Point - 268°C (514°F).
Min. Wet Boiling Point - 165℃ (329℉).
Yellowstuff ⁃ A first in a new range of 'Hybrid' materials that can be safely and legally used on worlds roads being R90 approved UK are a high friction upgrade pad for all fast street use
and can also be used on the track with proper bedding (see bed in procedures)
Yellowstuff has been the flagship pad by EBC for over a decade and gives instant brake response, great feel and modulations with silk-smooth noise free braking and was also improved in 2021 to be copper free and conform to all new legislations for the environment and our pads are fully shimmed chamfered and slotted .
Yellow arrives with pad surface Brake-in coating to accelerate pad bedding after install.
- 0.48 stable friction once bedded
- Strong initial bite ,work from cold
- Zero rotor damage
- Short to medium race lifetime
- Copper free for ECO compliance
- Fast street use is OK but please read our notes on Yellow Pad Bedding-In here
