ALFA ROMEO Brera 1.70 Petrol Turbo 200BHP 2009-2010 - All Products
Range/Fitment
Price: Low to High
Price: High to Low
Order By:
YOU SAVE £16.18
Our Price Ex VAT £256.21 £307.45 (inc VAT)
Kit contains one set of Bluestuff brake pads and one pair of GD slotted and dimpled brake discs Money saving brake kit including one set of pads and a pair of discs Bluestuff 5000 NDX race formula ultra high friction race pad with a friction level peaking above 0.6 under braking that will generate more G force than most, if not all pads out there NDX is capable of street use as it bites well from cold Pre-bedded out of the box, surface is heat seared or scorched at the factoryPair of slotted and dimpled upgrade brake discs with grooves that are designed to dispel gasses and debris
Read More...
One pair of slotted and dimpled upgrade brake discs. Wide slots and blind drilled dimples are designed to dispel gasses and debris. Manufactured from unique disc alloys and thermic black coated for corrosion resistance. These discs are runout tested.
Bluestuff Pad and GD Disc Rotor
In stock
Part No PD14KF524
RRP ex vat £269.69
Pad A Dimensions 132 x 77 x 16
Disc Type Grooved
Solid or Vented? V
Disc Bolts 5
Disc Diameter 330mm
Disc Height 40mm
Disc Thickness New 28mm
Disc Thickness Min 28mm
Kit Components DP51536NDX + GD1464
YOU SAVE £13.84
Our Price Ex VAT £219.33 £263.20 (inc VAT)
Kit contains one set of Bluestuff brake pads and one pair of OE replacement brake discs Money saving brake kit including one set of pads and a pair of discs Bluestuff 5000 NDX race formula ultra high friction race pad with a friction level peaking above 0.6 under braking that will generate more G force than most, if not all pads out there NDX is capable of street use as it bites well from cold Pre-bedded out of the box, surface is heat seared or scorched at the factoryPair of OE quality replacement brake discs
Read More...
OE quality replacement brake discs, precision cast from G3000 iron, surface ground and thermic black coated for corrosion resistance. These discs are runout tested and are an exact replacement for OE discs. This kit is perfect for general street use.
Bluestuff Pad and Plain Disc Rotor
In stock
Part No PD04KF524
RRP ex vat £230.87
Pad A Dimensions 132 x 77 x 16
Disc Type Plain
Solid or Vented? V
Disc Bolts 5
Disc Diameter 330mm
Disc Height 40mm
Disc Thickness New 28mm
Disc Thickness Min 28mm
Kit Components DP51536NDX + D1464
YOU SAVE £16.18
Our Price Ex VAT £256.21 £307.45 (inc VAT)
Kit contains one set of Bluestuff brake pads and one pair of USR slotted brake discs Money saving brake kit including one set of pads and a pair of discs Bluestuff 5000 NDX race formula ultra high friction race pad with a friction level peaking above 0.6 under braking that will generate more G force than most, if not all pads out there NDX is capable of street use as it bites well from cold Pre-bedded out of the box, surface is heat seared or scorched at the factoryPair of OE quality replacement brake discs
Read More...
One pair of slotted upgrade brake discs, slots dispel gasses and debris and give quiet braking. Manufactured from unique disc alloys and thermic black coated for corrosion resistance. These discs are runout tested.
Bluestuff Pad and USR Disc Rotor
In stock
Part No PD09KF524
RRP ex vat £269.69
Pad A Dimensions 132 x 77 x 16
Disc Type Slotted
Solid or Vented? V
Disc Bolts 5
Disc Diameter 330mm
Disc Height 40mm
Disc Thickness New 28mm
Disc Thickness Min 28mm
Kit Components DP51536NDX + USR1464
Our Price Ex VAT £103.71 £124.45 (inc VAT)
A great all round sport and race pad, revised to a new improved formula in 2021 for faster bed-in.
Bluestuff material exhibits a 0.52μ stable friction once bedded stable up to a slightly higher 550℃/1000℃ than its sister compound yellow but with the benefit of 30% longer life than yellow.
Blue has been a trackday favourite for years and is the spec pad for the BMW 318i Cup series throughout Europe. New formula is copper free to conform to upcoming environmental legislations
0.52μ stable friction once bedded Strong initial bite ,work from cold Zero rotor damage Copper free for ECO compliance Excellent upgrade pad for SUV and armored vehicles in street use
Read More...
Pads do require careful bedding in before track use. See bedding guidance .
Bluestuff also has good bite from cold and is an Aramid fibre base offering reduced rotor wear and has been popular with Trackday drivers due to its longer wear life than Yellowstuff, it's stablemate.
In stock
Part No DP51536NDX
RRP ex vat £103.71
Pad A Dimensions 132 x 77 x 16mm
Pad B Dimensions 155 x 73 x 18.5mm
R90 Approved ✅
Track Suitable? ✅
YOU SAVE £23.51
Our Price Ex VAT £176.35 £211.62 (inc VAT)
The latest in sport discs feature wide aperture slots that draw cool air into the braking contact area and reduce temperatures preventing brake fade.
Dimple drilling avoids stress cracks and the thermic black coating provides great looks whilst preventing corrosion.
Read More...
EBC sport discs now feature reduced 3 slot venting which provides slightly less air noise under heavy braking whilst still maintaining the benefits of cooler running with the full width slot design.
The design of these discs means that some wind noise is observed and if drivers feel they would find this offensive they are advised to select the quieter USR Ultimax series or the EBC plain disc.
Another great feature of slotted discs is the way they MAINTAIN FLAT AND PARALLEL PAD WEAR and avoid the record grooves or galling common with non-slotted discs. This improves pad contact and braking throughout the life of the disc and pad set.
In stock
Part No GD1464
RRP ex vat £195.94
Disc Type Grooved
Solid or Vented? V
Disc Bolts 5
Disc Diameter 330mm
Disc Height 40mm
Disc Thickness New 28mm
Disc Thickness Min 26mm
YOU SAVE £15.17
Our Price Ex VAT £113.75 £136.50 (inc VAT)
The latest in sport discs feature wide aperture slots that draw cool air into the braking contact area and reduce temperatures preventing brake fade.
Dimple drilling avoids stress cracks and the thermic black coating provides great looks whilst preventing corrosion.
Read More...
EBC sport discs now feature reduced 3 slot venting which provides slightly less air noise under heavy braking whilst still maintaining the benefits of cooler running with the full width slot design.
The design of these discs means that some wind noise is observed and if drivers feel they would find this offensive they are advised to select the quieter USR Ultimax series or the EBC plain disc.
Another great feature of slotted discs is the way they MAINTAIN FLAT AND PARALLEL PAD WEAR and avoid the record grooves or galling common with non-slotted discs. This improves pad contact and braking throughout the life of the disc and pad set.
In stock
Part No GD1465
RRP ex vat £126.39
Disc Type Grooved
Solid or Vented? V
Disc Bolts 5
Disc Diameter 292mm
Disc Height 43mm
Disc Thickness New 22mm
Disc Thickness Min 20mm
YOU SAVE £27.50
Our Price Ex VAT £129.89 £155.87 (inc VAT)
Surely the best aftermarket discs on sale anywhere, EBC Brakes offer OEM quality replacement discs made to the exact same spec as original parts using G3000 grey iron. Thermic black coated to prevent corrosion.
Read More...
Precision machined, balanced and 100% ONE BY ONE runout inspected to guarantee zero rotor distortion out of the box.
The quality and price point of the EBC Brakes discs combined with the 10,000 mile/6 months unconditional warranty make EBC Brakes a best buy brake part equal to or better than original parts.
Always fit new pads when replacing discs.
In stock
Part No D1464
RRP ex vat £152.81
Disc Type Plain
Solid or Vented? V
Disc Bolts 5
Disc Diameter 330mm
Disc Height 40mm
Disc Thickness New 28mm
Disc Thickness Min 26mm
YOU SAVE £15.18
Our Price Ex VAT £71.71 £86.05 (inc VAT)
Surely the best aftermarket discs on sale anywhere, EBC Brakes offer OEM quality replacement discs made to the exact same spec as original parts using G3000 grey iron. Thermic black coated to prevent corrosion.
Read More...
Precision machined, balanced and 100% ONE BY ONE runout inspected to guarantee zero rotor distortion out of the box.
The quality and price point of the EBC Brakes discs combined with the 10,000 mile/6 months unconditional warranty make EBC Brakes a best buy brake part equal to or better than original parts.
Always fit new pads when replacing discs.
In stock
Part No D1465
RRP ex vat £84.36
Disc Type Plain
Solid or Vented? V
Disc Bolts 5
Disc Diameter 292mm
Disc Height 43mm
Disc Thickness New 22mm
Disc Thickness Min 20mm
YOU SAVE £8.12
Our Price Ex VAT £60.90 £73.08 (inc VAT)
Excellent type approved upgrade pad for prestige imports and European/Asian cars Featuring Brake-In surface coating for instant bed-in after installation Low dust pad which gives a brake improvement of 20-25% on OE Minimal rotor damage characteristics These pads contain NO steel fibers
Read More...
Ceramic particles (not fibers) enhance the aramid fibre formulation used in EBC Brakes Redstuff to deliver powerful and long lasting silent braking for the discerning driver.
An ideal upgrade delivering great brake response and feel from first application of the brakes. Redstuff pads are NOT FOR TRACK USE . See Yellowstuff, Bluestuff, or the new RP1 and RPX full race pads for track use.
In stock
Part No DP31425C
RRP ex vat £67.67
Pad A Dimensions 116 x 50 x 17mm
R90 Approved ✅
Track Suitable? ❌
YOU SAVE £10.82
Our Price Ex VAT £81.14 £97.37 (inc VAT)
Excellent type approved upgrade pad for prestige imports and European/Asian cars Featuring Brake-In surface coating for instant bed-in after installation Low dust pad which gives a brake improvement of 20-25% on OE Minimal rotor damage characteristics These pads contain NO steel fibers
Read More...
Ceramic particles (not fibers) enhance the aramid fibre formulation used in EBC Brakes Redstuff to deliver powerful and long lasting silent braking for the discerning driver.
An ideal upgrade delivering great brake response and feel from first application of the brakes. Redstuff pads are NOT FOR TRACK USE . See Yellowstuff, Bluestuff, or the new RP1 and RPX full race pads for track use.
In stock
Part No DP31536C
RRP ex vat £90.16
Pad A Dimensions 132 x 77 x 16mm
R90 Approved ✅
Track Suitable? ❌
YOU SAVE £15.45
Our Price Ex VAT £244.62 £293.54 (inc VAT)
Kit contains one set of Redstuff brake pads and one pair of GD slotted and dimpled brake discs Money saving brake kit including one set of pads and a pair of discs Redstuff 3000 series type approved upgrade brake pad set Low dust pads which give a brake improvement of up to 15% Excellent brake upgrade for street use Pair of slotted and dimpled upgrade brake discs with grooves that are designed to dispel gasses and debris
Read More...
Redstuff 3000 series sport upgrade brake pads are manufactured in the UK and are type approved for your vehicle. Designed for long life with low dust and featuring Brake-In coating for faster bed-in.
One pair of slotted and dimpled upgrade brake discs. Wide slots and blind drilled dimples are designed to dispel gasses and debris. Manufactured from unique disc alloys and thermic black coated for corrosion resistance. These discs are runout tested.
Redstuff Pad and GD Disc Rotor
In stock
Part No PD12KF005
RRP ex vat £257.49
Pad A Dimensions 132 x 77 x 16
Disc Type Grooved
Solid or Vented? V
Disc Bolts 5
Disc Diameter 330mm
Disc Height 40mm
Disc Thickness New 28mm
Disc Thickness Min 28mm
Kit Components DP31536C + GD1464
YOU SAVE £10.48
Our Price Ex VAT £165.92 £199.10 (inc VAT)
Kit contains one set of Redstuff brake pads and one pair of GD slotted and dimpled brake discs Money saving brake kit including one set of pads and a pair of discs Redstuff 3000 series type approved upgrade brake pad set Low dust pads which give a brake improvement of up to 15% Excellent brake upgrade for street use Pair of slotted and dimpled upgrade brake discs with grooves that are designed to dispel gasses and debris
Read More...
Redstuff 3000 series sport upgrade brake pads are manufactured in the UK and are type approved for your vehicle. Designed for long life with low dust and featuring Brake-In coating for faster bed-in.
One pair of slotted and dimpled upgrade brake discs. Wide slots and blind drilled dimples are designed to dispel gasses and debris. Manufactured from unique disc alloys and thermic black coated for corrosion resistance. These discs are runout tested.
Redstuff Pad and GD Disc Rotor
In stock
Part No PD12KR004
RRP ex vat £174.65
Pad A Dimensions 116 x 50 x 17
Disc Type Grooved
Solid or Vented? V
Disc Bolts 5
Disc Diameter 292mm
Disc Height 43mm
Disc Thickness New 22mm
Disc Thickness Min 22mm
Kit Components DP31425C + GD1465
YOU SAVE £13.11
Our Price Ex VAT £207.74 £249.29 (inc VAT)
Kit contains one set of Redstuff brake pads and one pair of OE replacement brake discs Money saving brake kit including one set of pads and a pair of discs Redstuff 3000 series type approved upgrade brake pad set Low dust pads which give a brake improvement of up to 15% Excellent brake upgrade for street use Pair of OE quality replacement brake discs
Read More...
Redstuff 3000 series sport upgrade brake pads are manufactured in the UK and are type approved for your vehicle. Designed for long life with low dust and featuring Brake-In coating for faster bed-in.
One pair of premium OE quality replacement brake discs, precision cast from G3000 iron, surface ground and thermic black coated for corrosion resistance. These discs are runout tested and are an exact replacement for manufacturer discs.
This brake kit provides the perfect combination for general street use.
Redstuff Pad and Plain Disc Rotor
In stock
Part No PD02KF005
RRP ex vat £218.67
Pad A Dimensions 132 x 77 x 16
Disc Type Plain
Solid or Vented? V
Disc Bolts 5
Disc Diameter 330mm
Disc Height 40mm
Disc Thickness New 28mm
Disc Thickness Min 28mm
Kit Components DP31536C + D1464
YOU SAVE £8.21
Our Price Ex VAT £129.99 £155.99 (inc VAT)
Kit contains one set of Redstuff brake pads and one pair of OE replacement brake discs Money saving brake kit including one set of pads and a pair of discs Redstuff 3000 series type approved upgrade brake pad set Low dust pads which give a brake improvement of up to 15% Excellent brake upgrade for street use Pair of OE quality replacement brake discs
Read More...
Redstuff 3000 series sport upgrade brake pads are manufactured in the UK and are type approved for your vehicle. Designed for long life with low dust and featuring Brake-In coating for faster bed-in.
One pair of premium OE quality replacement brake discs, precision cast from G3000 iron, surface ground and thermic black coated for corrosion resistance. These discs are runout tested and are an exact replacement for manufacturer discs.
This brake kit provides the perfect combination for general street use.
Redstuff Pad and Plain Disc Rotor
In stock
Part No PD02KR004
RRP ex vat £136.83
Pad A Dimensions 116 x 50 x 17
Disc Type Plain
Solid or Vented? V
Disc Bolts 5
Disc Diameter 292mm
Disc Height 43mm
Disc Thickness New 22mm
Disc Thickness Min 22mm
Kit Components DP31425C + D1465
YOU SAVE £15.45
Our Price Ex VAT £244.62 £293.54 (inc VAT)
Kit contains one set of Redstuff brake pads and one pair of USR slotted brake discs Money saving brake kit including one set of pads and a pair of discs Redstuff 3000 series type approved upgrade brake pad set Low dust pads which give a brake improvement of up to 15% Excellent brake upgrade for street use Pair of slotted upgrade brake discs with grooves that are designed to dispel gasses and debris
Read More...
Redstuff 3000 series sport upgrade brake pads are manufactured in the UK and are type approved for your vehicle. Designed for long life with low dust and featuring Brake-In coating for faster bed-in.
One pair of slotted upgrade brake discs, slots dispel gasses and debris and give quiet braking. Manufactured from unique disc alloys and thermic black coated for corrosion resistance. These discs are runout tested.
Redstuff Pad and USR Disc Rotor
In stock
Part No PD07KF005
RRP ex vat £257.49
Pad A Dimensions 132 x 77 x 16
Disc Type Slotted
Solid or Vented? V
Disc Bolts 5
Disc Diameter 330mm
Disc Height 40mm
Disc Thickness New 28mm
Disc Thickness Min 28mm
Kit Components DP31536C + USR1464
YOU SAVE £10.48
Our Price Ex VAT £165.92 £199.10 (inc VAT)
Kit contains one set of Redstuff brake pads and one pair of USR slotted brake discs Money saving brake kit including one set of pads and a pair of discs Redstuff 3000 series type approved upgrade brake pad set Low dust pads which give a brake improvement of up to 15% Excellent brake upgrade for street use Pair of slotted upgrade brake discs with grooves that are designed to dispel gasses and debris
Read More...
Redstuff 3000 series sport upgrade brake pads are manufactured in the UK and are type approved for your vehicle. Designed for long life with low dust and featuring Brake-In coating for faster bed-in.
One pair of slotted upgrade brake discs, slots dispel gasses and debris and give quiet braking. Manufactured from unique disc alloys and thermic black coated for corrosion resistance. These discs are runout tested.
Redstuff Pad and USR Disc Rotor
In stock
Part No PD07KR004
RRP ex vat £174.65
Pad A Dimensions 116 x 50 x 17
Disc Type Slotted
Solid or Vented? V
Disc Bolts 5
Disc Diameter 292mm
Disc Height 43mm
Disc Thickness New 22mm
Disc Thickness Min 22mm
Kit Components DP31425C + USR1465
Our Price Ex VAT £122.55 £147.06 (inc VAT)
EBC Racing's RP‑1 compound is an ultra‑high performance track and race pad designed for high performance vehicles driven hard on track. RP‑1 has a very stable friction coefficient of 0.45μ up to and beyond 750℃, making it an excellent performer for even the most demanding vehicle applications.
Due to its relatively high friction coefficient, RP‑1 is not Reg 90 homologated for road use within Europe and is therefore illegal for use on the public road. Unlike some other race pads on the market, RP‑1 offers a usable cold friction of 0.35μ below 100℃ meaning it can be safely used as a road pad for non‑European markets where Reg 90 homologation is not mandatory. At 100℃ the friction gently climbs to 0.45μ and stays there up to and beyond the designed upper working temperature range of 750℃.
Read More...
RP‑1 boasts good pad life but the unique characteristic of RP‑1 is that it boasts exceptionally low disc wear, lower than virtually all other competitor race materials tested by EBC Racing. RP‑1 has a progressive pedal feel with unrivalled modulation. RP‑1 does not have the snatchy pedal feel or high levels of noise often associated with other race pads on the market.
Compared to EBC Racing's other track pad RP‑X, RP‑1 has a 25% reduction in friction coefficient across its working temperature range making RP‑1 the more suitable choice for light‑medium weight cars, cars with non EBC Big Brake Kits fitted, or vehicles with no ABS. For heavy or inherently under‑servoed vehicles which suit a very aggressive pad, EBC Racing's other track material RP‑X may be preferable.
In stock
Part No DP81210RP1
RRP ex vat £122.55
Pad A Dimensions 131 x 75 x 15mm
R90 Approved ❌
Track Suitable? RACE USE ONLY
Our Price Ex VAT £127.55 £153.06 (inc VAT)
EBC Racings' RP‑X compound is an ultra‑high performance track and race pad designed for performance vehicles driven hard on track and for dedicated race cars. RP‑X has a very stable friction coefficient of 0.55μ up to and beyond 850℃, making it an excellent performer for even the most demanding vehicle applications.
RP‑X also has a high friction level from cold, requiring no warmup to achieve maximum braking effect which makes this material well suited for sprint race and hill climb events. Although RP‑X is not R90 homologated for use on the public roads in EU member states, the fact this material possesses excellent cold performance means RP‑X can be safely used for driving to/from motorsport events (where local laws permit).
Read More...
EBC Racing does however emphasise that RP‑X has been developed for peak on‑track performance, meaning higher levels of brake dust and brake noise should be expected. RP‑X has comparable disc wear to many other popular track/race materials, however RP‑X disc wear is considerably greater than EBC Racing's other track pad RP‑1 which results in high levels of brake dust.
Compared to RP‑1, RP‑X has a 25% increase in friction coefficient across its working temperature range with a much more 'positive' initial bite. This characteristic potentially makes RP‑X more suitable on heavy or inherently under‑servoed vehicles. For light‑medium weight vehicles, cars with non EBC Big Brake Kits fitted, or vehicles with no ABS, the less fierce nature of EBC Racing's other track material RP‑1 may be preferable.
In stock
Part No DP81210RPX
RRP ex vat £127.55
Pad A Dimensions 131 x 75 x 15mm
R90 Approved ❌
Track Suitable? RACE USE ONLY
Our Price Ex VAT £80.00 £96.00 (inc VAT)
These new perforated titanium heat insulation shims have been shown in laboratory tests to reduce heat transfer through the pads to the caliper by around 90℉.
Read More...
How to Install Shims must be flat and sit without any gapping on the rear of the brake pad. If your pad set is supplied with any other shims such as the rubberised shims on most stock pads, these MUST be removed before fitting titanium shims to avoid a pad over-thickness situation. Simply prize the old shims off to break the adhesive seal with a blunt edge screwdriver or similar, and once removed lightly, sand the rear of the pad to remove any excess glue or surface irregularities. The new titanium shims MUST be snugged up against the pad backing plate without any debris between to avoid long pedal/brake sponge. Titanium shim sets for sliding calipers contain only two shims and these must each be applied to the pad located next to the piston. Titanium shims for multi-piston calipers are supplied for all four pads in the axle set.
In stock
Part No SH1210
RRP ex vat £80.00
YOU SAVE £6.19
Our Price Ex VAT £36.15 £43.38 (inc VAT)
The perfect quality daily driver pad option for all modern cars, petrol, diesel, hybrid or electric.
These premium quality British made pads are designed to meet or exceed the performance of any OEM pad and are fully R90 approved. The EBC Brakes Ultimax range are long lasting, high friction pads designed for normal urban driving at all speeds on prestige cars, 4x4 and light trucks.
Copper free for ECO compliance
Read More...
Ultimax pads feature centre slots, edge chamfers and Brake‑In surface coating to condition discs after installation and help to quickly deliver stopping power on new pads. Hardware and wear leads included where fitted as standard. Tests at the MIRA research facility prove that these pads typically stop faster then OE.
NOT FOR TRACK USE. Choose Greenstuff or Redstuff for fast street use, Yellowstuff for track use and Bluestuff , RP‑1 or RP‑X for race use.
In stock
Part No DP1425
RRP ex vat £41.31
Pad A Dimensions 116 x 50 x 17mm
R90 Approved ✅
Track Suitable? ❌
YOU SAVE £6.44
Our Price Ex VAT £37.58 £45.10 (inc VAT)
The perfect quality daily driver pad option for all modern cars, petrol, diesel, hybrid or electric.
These premium quality British made pads are designed to meet or exceed the performance of any OEM pad and are fully R90 approved. The EBC Brakes Ultimax range are long lasting, high friction pads designed for normal urban driving at all speeds on prestige cars, 4x4 and light trucks.
Copper free for ECO compliance
Read More...
Ultimax pads feature centre slots, edge chamfers and Brake‑In surface coating to condition discs after installation and help to quickly deliver stopping power on new pads. Hardware and wear leads included where fitted as standard. Tests at the MIRA research facility prove that these pads typically stop faster then OE.
NOT FOR TRACK USE. Choose Greenstuff or Redstuff for fast street use, Yellowstuff for track use and Bluestuff , RP‑1 or RP‑X for race use.
In stock
Part No DP1536
RRP ex vat £42.95
Pad A Dimensions 132 x 77 x 16mm
R90 Approved ✅
Track Suitable? ❌
YOU SAVE £17.35
Our Price Ex VAT £274.83 £329.80 (inc VAT)
Kit contains two sets of Ultimax brake pads and two sets of OE replacement brake discs Saves up to 12% over cost of buying separate parts Ultimax2 type approved brake pad sets Pads are designed for a long life with minimal dust Two pairs of OE quality replacement brake discs
Read More...
Ultimax2 high quality OE replacement brake pads are manufactured in the UK and are type approved for your vehicle. Designed for long life with minimal dust and featuring Brake-In coating for faster bed-in.
Two pairs of premium OE quality replacement brake discs, precision cast from G3000 iron, surface ground with thermic black coating for corrosion resistance. These discs are runout tested and are an exact replacement for manufacturer discs.
This brake kit provides the perfect combination for general street use.
Ultimax Pad and Plain Disc Full Kit
In stock
Part No PD40K044
RRP ex vat £289.29
Front PadA Dimensions 132 x 77 x 16mm
Front Disc Type Plain
Front Solid or Vented V
Front Bolt Holes 5
Front Disc Diameter 330mm
Front Disc Height 40mm
Front Disc Thickness New 28mm
Front Disc Thickness Min 26mm
Rear PadA Dimensions 116 x 50 x 17mm
Rear Disc Type Plain
Rear Solid or Vented V
Rear Bolt Holes 5
Rear Disc Diameter 292mm
Rear Disc Height 43mm
Rear Disc Thickness New 22mm
Rear Disc Thickness Min 20mm
Kit Components DP1536 + D1464 + DP1425 + D1465
YOU SAVE £10.57
Our Price Ex VAT £167.38 £200.86 (inc VAT)
Kit contains one set of Ultimax brake pads and one pair of OE replacement brake discs Money saving brake kit including one set of pads and a pair of discs Ultimax2 type approved brake pad sets Pads are designed for a long life with minimal dust. One pair of OE quality replacement brake discs Ultimax2 high quality OE replacement brake pads are manufactured in the UK and are type approved for your vehicle. Designed for long life with minimal dust and featuring Brake-In coating for faster bed-in.
One pair of premium OE quality replacement brake discs, precision cast from G3000 iron, surface ground and thermic black coated for corrosion resistance. These discs are runout tested and are an exact replacement for manufacturer discs.
This brake kit provides the perfect combination for general street use.
Read More...
Ultimax2 high quality OE replacement brake pads are manufactured in the UK and are type approved for your vehicle. Designed for long life with minimal dust and featuring Brake-In coating for faster bed-in.
One pair of premium OE quality replacement brake discs, precision cast from G3000 iron, surface ground and thermic black coated for corrosion resistance.
These discs are runout tested and are an exact replacement for manufacturer discs.
This brake kit provides the perfect combination for general street use.
Ultimax Pad and Plain Disc Rotor
In stock
Part No PDKF037
RRP ex vat £176.19
Pad A Dimensions 132 x 77 x 16mm
Disc Type Plain
Solid or Vented? V
Disc Bolts 5
Disc Diameter 330mm
Disc Height 40mm
Disc Thickness New 28mm
Disc Thickness Min 28mm
Kit Components DP1536 + D1464
YOU SAVE £6.78
Our Price Ex VAT £107.45 £128.94 (inc VAT)
Kit contains one set of Ultimax brake pads and one pair of OE replacement brake discs Money saving brake kit including one set of pads and a pair of discs Ultimax2 type approved brake pad sets Pads are designed for a long life with minimal dust. One pair of OE quality replacement brake discs Ultimax2 high quality OE replacement brake pads are manufactured in the UK and are type approved for your vehicle. Designed for long life with minimal dust and featuring Brake-In coating for faster bed-in.
One pair of premium OE quality replacement brake discs, precision cast from G3000 iron, surface ground and thermic black coated for corrosion resistance. These discs are runout tested and are an exact replacement for manufacturer discs.
This brake kit provides the perfect combination for general street use.
Read More...
Ultimax2 high quality OE replacement brake pads are manufactured in the UK and are type approved for your vehicle. Designed for long life with minimal dust and featuring Brake-In coating for faster bed-in.
One pair of premium OE quality replacement brake discs, precision cast from G3000 iron, surface ground and thermic black coated for corrosion resistance.
These discs are runout tested and are an exact replacement for manufacturer discs.
This brake kit provides the perfect combination for general street use.
Ultimax Pad and Plain Disc Rotor
In stock
Part No PDKR016
RRP ex vat £113.10
Pad A Dimensions 116 x 50 x 17mm
Disc Type Plain
Solid or Vented? V
Disc Bolts 5
Disc Diameter 292mm
Disc Height 43mm
Disc Thickness New 22mm
Disc Thickness Min 22mm
Kit Components DP1425 + D1465
YOU SAVE £23.51
Our Price Ex VAT £176.35 £211.62 (inc VAT)
Super quiet sport slotted brake discs featuring the new EBC Brakes narrow profile slot pattern which helps cool and de-gas brakes under load and speed but eliminates air noise common with some slotted discs.
Thermic black coated in the UK, leaving your discs looking like new for thousands of miles.
Read More...
The price you see is for TWO DISCS, one left one right.
Another great feature of slotted discs is the way they MAINTAIN FLAT AND PARALLEL PAD WEAR and avoid the record grooves or galling common with non-slotted discs.
This improves pad contact and braking throughout the life of the disc and pad set.
Another major benefit of the EBC Brakes fine slotted discs is their ability to totally resist cracking common with 'through-drilled' discs.
Prestige fast street cars
In stock
Part No USR1464
RRP ex vat £195.94
Disc Type Slotted
Solid or Vented? V
Disc Bolts 5
Disc Diameter 330mm
Disc Height 40mm
Disc Thickness New 28mm
Disc Thickness Min 26mm
YOU SAVE £15.17
Our Price Ex VAT £113.75 £136.50 (inc VAT)
Super quiet sport slotted brake discs featuring the new EBC Brakes narrow profile slot pattern which helps cool and de-gas brakes under load and speed but eliminates air noise common with some slotted discs.
Thermic black coated in the UK, leaving your discs looking like new for thousands of miles.
Read More...
The price you see is for TWO DISCS, one left one right.
Another great feature of slotted discs is the way they MAINTAIN FLAT AND PARALLEL PAD WEAR and avoid the record grooves or galling common with non-slotted discs.
This improves pad contact and braking throughout the life of the disc and pad set.
Another major benefit of the EBC Brakes fine slotted discs is their ability to totally resist cracking common with 'through-drilled' discs.
Prestige fast street cars
In stock
Part No USR1465
RRP ex vat £126.39
Disc Type Slotted
Solid or Vented? V
Disc Bolts 5
Disc Diameter 292mm
Disc Height 43mm
Disc Thickness New 22mm
Disc Thickness Min 20mm
YOU SAVE £4.57
Our Price Ex VAT £72.41 £86.89 (inc VAT)
Yellowstuff ⁃ A first in a new range of 'Hybrid' materials that can be safely and legally used on worlds roads being R90 approved UK are a high friction upgrade pad for all fast street use and can also be used on the track with proper bedding (see bed in procedures )
Yellowstuff has been the flagship pad by EBC for over a decade and gives instant brake response, great feel and modulations with silk-smooth noise free braking and was also improved in 2021 to be copper free and conform to all new legislations for the environment and our pads are fully shimmed chamfered and slotted .
Yellow arrives with pad surface Brake-in coating to accelerate pad bedding after install.
0.48 stable friction once bedded Strong initial bite ,work from cold Zero rotor damage Short to medium race lifetime Copper free for ECO compliance
Read More...
With a stable friction coefficient of 0.42μ right up to race temperatures of 450℃,Yellowstuff is a very popular pad amongst kit car drivers and lighter race cars having clinched the MX5 race series. Although heat scorched, the compound does require careful bedding in before race use, see guidance here.
If planning track use we recommend using the pad for a period on the street to pre bed before making a track excursion. If you require faster track bedding also consider our new Bluestuff R 90 approved compound which beds in faster.
In stock
Part No DP41425R
RRP ex vat £76.22
Pad A Dimensions 116 x 50 x 17mm
R90 Approved ✅
Track Suitable? ✅
YOU SAVE £5.93
Our Price Ex VAT £93.77 £112.52 (inc VAT)
Yellowstuff ⁃ A first in a new range of 'Hybrid' materials that can be safely and legally used on worlds roads being R90 approved UK are a high friction upgrade pad for all fast street use and can also be used on the track with proper bedding (see bed in procedures )
Yellowstuff has been the flagship pad by EBC for over a decade and gives instant brake response, great feel and modulations with silk-smooth noise free braking and was also improved in 2021 to be copper free and conform to all new legislations for the environment and our pads are fully shimmed chamfered and slotted .
Yellow arrives with pad surface Brake-in coating to accelerate pad bedding after install.
0.48 stable friction once bedded Strong initial bite ,work from cold Zero rotor damage Short to medium race lifetime Copper free for ECO compliance
Read More...
With a stable friction coefficient of 0.42μ right up to race temperatures of 450℃,Yellowstuff is a very popular pad amongst kit car drivers and lighter race cars having clinched the MX5 race series. Although heat scorched, the compound does require careful bedding in before race use, see guidance here.
If planning track use we recommend using the pad for a period on the street to pre bed before making a track excursion. If you require faster track bedding also consider our new Bluestuff R 90 approved compound which beds in faster.
In stock
Part No DP41536R
RRP ex vat £98.71
Pad A Dimensions 132 x 77 x 16mm
R90 Approved ✅
Track Suitable? ✅
YOU SAVE £15.91
Our Price Ex VAT £251.93 £302.32 (inc VAT)
Kit contains one set of Yellowstuff brake pads and one pair of GD slotted and dimpled brake discs Money saving brake kit including one set of pads and a pair of discs Yellowstuff 4000 series type approved upgrade brake pad for street, trackday or drift use Designed for use on faster, higher horsepower vehicles and short track use Pair of slotted and dimpled upgrade brake discs with grooves that are designed to dispel gasses and debris
Read More...
Yellowstuff 4000 series sport upgrade brake pads are manufactured in the UK and are type approved for your vehicle. Designed for faster and higher horsepower vehicles and for short track use but due to heat range, these pads are great as a brake upgrade on 4x4 vehicles particularly when towing or under heavy load. Featuring Brake-In coating for faster bed-in.
One pair of slotted and dimpled upgrade brake discs. Wide slots and blind drilled dimples are designed to dispel gasses and debris. Manufactured from unique disc alloys and thermic black coated for corrosion resistance. These discs are runout tested.
Yellowstuff Pad and GD Disc Rotor
In stock
Part No PD13KF013
RRP ex vat £265.19
Pad A Dimensions 132 x 77 x 16
Disc Type Grooved
Solid or Vented? V
Disc Bolts 5
Disc Diameter 330mm
Disc Height 40mm
Disc Thickness New 28mm
Disc Thickness Min 28mm
Kit Components DP41536R + GD1464
YOU SAVE £10.94
Our Price Ex VAT £173.23 £207.88 (inc VAT)
Kit contains one set of Yellowstuff brake pads and one pair of GD slotted and dimpled brake discs Money saving brake kit including one set of pads and a pair of discs Yellowstuff 4000 series type approved upgrade brake pad for street, trackday or drift use Designed for use on faster, higher horsepower vehicles and short track use Pair of slotted and dimpled upgrade brake discs with grooves that are designed to dispel gasses and debris
Read More...
Yellowstuff 4000 series sport upgrade brake pads are manufactured in the UK and are type approved for your vehicle. Designed for faster and higher horsepower vehicles and for short track use but due to heat range, these pads are great as a brake upgrade on 4x4 vehicles particularly when towing or under heavy load. Featuring Brake-In coating for faster bed-in.
One pair of slotted and dimpled upgrade brake discs. Wide slots and blind drilled dimples are designed to dispel gasses and debris. Manufactured from unique disc alloys and thermic black coated for corrosion resistance. These discs are runout tested.
Yellowstuff Pad and GD Disc Rotor
In stock
Part No PD13KR009
RRP ex vat £182.35
Pad A Dimensions 116 x 50 x 17
Disc Type Grooved
Solid or Vented? V
Disc Bolts 5
Disc Diameter 292mm
Disc Height 43mm
Disc Thickness New 22mm
Disc Thickness Min 22mm
Kit Components DP41425R + GD1465
YOU SAVE £13.58
Our Price Ex VAT £215.05 £258.06 (inc VAT)
Kit contains one set of Yellowstuff brake pads and one pair of OE replacement brake discs Money saving brake kit including one set of pads and a pair of discs Yellowstuff 4000 series type approved upgrade brake pad set for street, trackday or drift use Designed for use on faster, higher horsepower vehicles and for short track use Pair of OE quality replacement brake discs
Read More...
UK made Yellowstuff 4000 series sport upgrade brake pads are type approved for your vehicle. For faster, higher horsepower vehicles and short track use. Due to heat range, they're a great brake upgrade on 4x4 vehicles particularly when towing or under heavy load. With Brake-In coating for faster bed-in.
OE quality replacement brake discs, precision cast from G3000 iron, surface ground and thermic black coated for corrosion resistance. These discs are runout tested and are an exact replacement for OE discs. This kit is perfect for general street use.
Yellowstuff Pad and Plain Disc Rotor
In stock
Part No PD03KF022
RRP ex vat £226.37
Pad A Dimensions 132 x 77 x 16
Disc Type Plain
Solid or Vented? V
Disc Bolts 5
Disc Diameter 330mm
Disc Height 40mm
Disc Thickness New 28mm
Disc Thickness Min 28mm
Kit Components DP41536R + D1464
YOU SAVE £8.67
Our Price Ex VAT £137.29 £164.75 (inc VAT)
Kit contains one set of Yellowstuff brake pads and one pair of OE replacement brake discs Money saving brake kit including one set of pads and a pair of discs Yellowstuff 4000 series type approved upgrade brake pad set for street, trackday or drift use Designed for use on faster, higher horsepower vehicles and for short track use Pair of OE quality replacement brake discs
Read More...
UK made Yellowstuff 4000 series sport upgrade brake pads are type approved for your vehicle. For faster, higher horsepower vehicles and short track use. Due to heat range, they're a great brake upgrade on 4x4 vehicles particularly when towing or under heavy load. With Brake-In coating for faster bed-in.
OE quality replacement brake discs, precision cast from G3000 iron, surface ground and thermic black coated for corrosion resistance. These discs are runout tested and are an exact replacement for OE discs. This kit is perfect for general street use.
Yellowstuff Pad and Plain Disc Rotor
In stock
Part No PD03KR014
RRP ex vat £144.52
Pad A Dimensions 116 x 50 x 17
Disc Type Plain
Solid or Vented? V
Disc Bolts 5
Disc Diameter 292mm
Disc Height 43mm
Disc Thickness New 22mm
Disc Thickness Min 22mm
Kit Components DP41425R + D1465
YOU SAVE £15.91
Our Price Ex VAT £251.93 £302.32 (inc VAT)
Kit contains one set of Yellowstuff brake pads and one pair of USR slotted brake discs Money saving brake kit including one set of pads and a pair of discs Yellowstuff 4000 series type approved upgrade brake pad set for street, trackday or drift use Designed for use on faster, higher horsepower vehicles and for short track use Pair of slotted upgrade brake discs with grooves that are designed to dispel gasses and debris
Read More...
UK made Yellowstuff 4000 series sport upgrade brake pads are type approved for your vehicle. For faster, higher horsepower vehicles and short track use. Due to heat range, they�re a great brake upgrade on 4x4 vehicles particularly when towing or under heavy load. With Brake-In coating for faster bed-in.
One pair of slotted upgrade brake discs. Slots are designed to dispel gasses and debris and give quiet braking. Manufactured from unique disc alloys and thermic black coated for corrosion resistance. These discs are runout tested.
Yellowstuff Pad and USR Disc Rotor Kit
In stock
Part No PD08KF013
RRP ex vat £265.19
Pad A Dimensions 132 x 77 x 16
Disc Type Slotted
Solid or Vented? V
Disc Bolts 5
Disc Diameter 330mm
Disc Height 40mm
Disc Thickness New 28mm
Disc Thickness Min 28mm
Kit Components DP41536R + USR1464
YOU SAVE £10.94
Our Price Ex VAT £173.23 £207.88 (inc VAT)
Kit contains one set of Yellowstuff brake pads and one pair of USR slotted brake discs Money saving brake kit including one set of pads and a pair of discs Yellowstuff 4000 series type approved upgrade brake pad set for street, trackday or drift use Designed for use on faster, higher horsepower vehicles and for short track use Pair of slotted upgrade brake discs with grooves that are designed to dispel gasses and debris
Read More...
UK made Yellowstuff 4000 series sport upgrade brake pads are type approved for your vehicle. For faster, higher horsepower vehicles and short track use. Due to heat range, they�re a great brake upgrade on 4x4 vehicles particularly when towing or under heavy load. With Brake-In coating for faster bed-in.
One pair of slotted upgrade brake discs. Slots are designed to dispel gasses and debris and give quiet braking. Manufactured from unique disc alloys and thermic black coated for corrosion resistance. These discs are runout tested.
Yellowstuff Pad and USR Disc Rotor Kit
In stock
Part No PD08KR009
RRP ex vat £182.35
Pad A Dimensions 116 x 50 x 17
Disc Type Slotted
Solid or Vented? V
Disc Bolts 5
Disc Diameter 292mm
Disc Height 43mm
Disc Thickness New 22mm
Disc Thickness Min 22mm
Kit Components DP41425R + USR1465